ABCO Adult Rehabilitation Change Table details

"ABCO" ADULT Rehabilitation CHANGE TABLE details

"ABCO" Rehabilitation Adult Change Table standard table

The ABCO Change Table is an Australian manufactured table using a "Linak" motor unit manufactured in Denmark. The table is 193cm by 71cm wide. The height range is 45 to 95cm and can lift 200kg. This table has 4 x 125mm braked castors with one of the castors direction lockable to prevent the "shopping trolley effect". Ground clearance is 15cm to allow for patient hoists. Vinyl covered top uses medical grade vinyl over 12mm soft foam them 38mm firm foam on a plywood board.

"ABCO" Rehabilitation Adult Change Table options

ITEM standard table	OPTION		ITEM standard table	OPTION
Upholstery 70cm wide	80cm wide		Vinyl colour "Navy"	Choice as per colour chart
125mm braked castors	High retractable castors		200kg lifting capacity	350kg lifting capacity
No cot sides	Add 1 or 2 upholstered cot sides		No cot ends	Add 1 or 2 cot ends.
Foot control (low voltage)	Hand control (low voltage)		No battery	add battery backup
No body strap	Velcro body strap		No strap bar	Strap bars either side

Body strap, strap bar and vinyl colour choice

-->

Detailed specifications

ITEM	SPECIFICATION		ITEM	SPECIFICATION
Couch dimensions	1930 x 710mm (+ cot sides and ends)		Frame	Heavy steel plate and steel tube powder coated grey
Height range	450 - 950mm		Height lift mechanism	2 swing arms
Lift motor	"Linak" European motor		Supply voltage	230v ac 59Hz 1.5amp
Lifting capacity	200kg (optional 350kg)		Motor operating voltage	24v DC (70VA)
Foot switch(or hand switch)	24v DC		Shipping dimensions	179x73x85cm 85kg
ARTG No	123753		Manufacturer	ABCO Health Care, Australia

This information is given as guide to the options available with this device.
All details are subject to change without notice.
Refer to manufactures instruction book for full operating details.

Copyright © I.D.Stewart Pty. Ltd. 2019 all rights reserved. CoffeeCup HTML Editor (www.coffeecup.com)