Update 10th January 2020

ABCO HOSPITAL EXAMINATION COUCH details and specifications

I. D. Stewart Pty. Ltd.

ABN 69 001 130 338

Suppliers of quality Physiotherapy and Rehabilitation Equipment.
Phone 02 9878 4217 (Australia)Mobile 0408 249 432
Send us an email idstewart@bigpond.com HOME PAGE


The ABCO HOSPITAL EXAMINATION COUCH has 2 section and is fitted with 125mm braked castors. The ABCO HOSPITAL EXAMINATION COUCH 3 section is fitted with 125mm braked castors

"ABCO" 2 section and 3 section Examination Couch details.

The ABCO Examination Couches are manufactured in Australia use the "Linak" motor units manufactured in Denmark. These are general purpose examination and treatment couches designed for use in medical rooms. They have 125mm braked castors to allow ease of movement. The electric control of the height and the back rest is controlled by a low voltage hand switch. The height range of 45 to 95cm allows easy access when lowered and can lift 200kg with the option of 350kg lifting. Vinyl covered top uses medical grade vinyl over 12mm soft foam them 38mm firm foam on a heavy plywood board.


The ABCO HOSPITAL EXAMINATION COUCH 2 section has a backrest 68cm long and a 122cm long section. The ABCO HOSPITAL EXAMINATION COUCH 3 section raises from 50 to 100cm.


The towel roll holder, the 75mm braked castors, the Gynae Lithotomy knee supports and the cot sides are factory fitted items. The stools (of course) may be supplied later.

Optional gynae knee supports
Gynae Lithotomy knee supports
Optional towel roll holder
Towel roll holder
Option Examination couch removable arm rests
Removable armrests
Optional Examination couch cot side
Cot side
Optional Examination couch face hole
The stool with backrest is needed wen carrying out long treatments.
Work stool with back rest.
The adjustable height stool can be supplied in a large range of vinyl colours.
Adjustable height work stool.
The examinatio couches have an optional treatment arm board
treatment arm board.
The examination couches have a choice of vinyl colours.
Couch and stool vinyl.

"ABCO" HOSPITAL EXAMINATION COUCH detailed specifications

Couch dimensions 1930 x 700mm (or 600mm) Frame Heavy steel plate and steel tube powder coated grey
Height range 450 to 950mm Height lift mechanism 2 swing arms
Lift motor "Linak" European motor Supply voltage 230v ac 59Hz 1.5amp
Lifting capacity 200kg (optional 350kg) Motor operating voltage 24v DC (70VA)
Foot switch(or hand switch) 24v DC Shipping dimensions 170x73x60cm 90kg
ARTG No 123753 Manufacturer ABCO Health Care, Australia

This information is given as guide to the options available with this device.
All details are subject to change without notice.
Refer to manufactures instruction book for full operating details.

Manufactured by ABCO Health Care, Victoria (Australia).

I. D. Stewart Pty. Ltd.

ABN 69 001 130 338

56 Twin Road, North Ryde NSW 2113
Phone 02 9878 4217 (Australia)Mobile 0408 249 432
Send us an email idstewart@bigpond.com HOME PAGE

Copyright I.D.Stewart Pty. Ltd. 2019 all rights reserved. CoffeeCup HTML Editor (www.coffeecup.com)