Update 22nd January 1019

ABCO G30 Gynae chair details and specifications

I. D. Stewart Pty. Ltd.

ABN 69 001 130 338

Suppliers of quality Physiotherapy and Rehabilitation Equipment.
Phone 02 9878 4217 (Australia)Mobile 0408 249 432
Send us an email idstewart@bigpond.com HOME PAGE

"ABCO" G30 Gynae Chair details

The G30 Gynae Chair has a foot end which swings down to make a foot rest. The G30 Gynae Chair raises from 50 to 100cm.

"ABCO" G30 Gynae Chair specifications.

The ABCO G30 Gynae Chair is an Australian manufactured couch using a "Linak" motor unit manufactured in Denmark. This is a general purpose examination and treatment chair for Gynaecology and similar modalities. This chair has retractable castors to allow ease of movement. The electric control of the height, seat and backrest can be controlled from the front of the chairgt and the foot rest has gas strut assist for ease of use. The height range is 50 to 100cm and can lift 200kg. Vinyl covered top uses medical grade vinyl over 12mm soft foam them 38mm firm foam on a plywood board.

"ABCO" G30 Gynae Chair with removable foot rest

The G30 Gynae Chair can be supplied with a removable foot end. The G30 Gynae Chair shown  extended

The ABCO G30 Gynae Chair with the removable foot rest allows closer access. The gynae knee supports or the gynae foot pads may be fitted.
The removable panel has 2 square shafts that slide into the main frame giving the foot panel the strength to accept being sat apon.

"ABCO" G30 Gynae Chair options

The towel roll holder and the 75mm braked castors are factory fitted items. The Gynae Lithotomy knee supports and the stool (of course) may be supplied later.

Optional Gynae Lithotomy knee supports
Gynae Lithotomy knee supports
Optional Removable armrests
Removable armrests
Optional towel roll holder
Towel roll holder
Optional Gynae Chair breath hole
Gynae chair breath hole.
Optional Gynae Chair 75mm castors.
75mm castors option
The adjustable height stool can be supplied in a large range of vinyl colours.
Adjustable height work stool.
The stool with backrest is needed wen carrying out long treatments.
Work stool with back rest.
The Gynae chair have a choice of vinyl colours
Couch and stool vinyl.

ABCO G30 Gynae Chair detailed specifications

Couch dimensions 1940 x 600mm (+ cot sides and ends) Frame Heavy steel plate and steel tube powder coated grey
Height range 510 - 910mm Height lift mechanism 2 swing arms
Lift motor "Linak" European motor Supply voltage 230v ac 59Hz 1.5amp
Lifting capacity 200kg (optional 350kg) Motor operating voltage 24v DC (70VA)
Foot switch(or hand switch) 24v DC Shipping dimensions 170x80x65cm 100kg
ARTG No 123753 Manufacturer ABCO Health Care, Australia

This information is given as guide to the options available with this device.
All details are subject to change without notice.
Refer to manufactures instruction book for full operating details.

Manufactured by ABCO Health Care, Dandenong South, Victoria (Australia).

I. D. Stewart Pty. Ltd.

ABN 69 001 130 338

56 Twin Road, North Ryde NSW 2113
Phone 02 9878 4217 (Australia)Mobile 0408 249 432
Send us an email idstewart@bigpond.com HOME PAGE

Copyright I.D.Stewart Pty. Ltd. 2019 all rights reserved. CoffeeCup HTML Editor (www.coffeecup.com)