ABCO G35 Gynae chair details and specifications
I. D. Stewart Pty. Ltd.
ABN 69 001 130 338
Suppliers of quality Physiotherapy and Rehabilitation Equipment.
Phone 02 9878 4217 (Australia)Mobile 0408 249 432
Send us an email
idstewart@bigpond.com
"ABCO" G35 Gynae Chair details
"ABCO" G35 Gynae Chair specifications.
The ABCO G35 Gynae Chair is an Australian manufactured couch using 2 "Linak" column motor units manufactured in Denmark.
This is designed for bigger patients (250kg lifting) as general purpose examination and treatment chair for Gynaecology and similar
modalities. This chair has the option of 100mm lockable castors. The electric control of the height (56 to 96cm), seat (20deg. tilt) and
backrest (up to 80deg.) can be controlled by the foot switch from the front of the chair. The foot pads can be removed and the 47cm long extension section fitted to
make a flat couch. Their is the option of Lithotomy Knee Supports which exchange with the foot pads.
Vinyl covered top uses medical grade vinyl over 12mm soft foam them 38mm firm foam on a plywood board. The standard widyh is 56cm.
The footprint of this chair is 92cm x 56cm.
By using the 2 column motor system there is no horizontal shift as the chair travels from minimum to maximum height.
"ABCO" G35 Gynae Chair options
The towel roll holder is a factory fitted item. The Gynae Lithotomy knee supports and the stool (of course) may be supplied later. The stool vinyl may be the same choice as the Gynae chair.
ABCO G35 Gynae Chair detailed specifications
ITEM | SPECIFICATION | ITEM | SPECIFICATION | |
---|---|---|---|---|
Couch dimensions | 1900 x 560mm footprint 92cm x 56cm. |
Frame | Heavy steel plate powder coated "Precious Silver Pearl". | |
Height range | 560 - 960mm, tilt to 20deg. | Height lift mechanism | dual column | |
Lift motor | "Linak" European motor | Supply voltage | 230v ac 59Hz 1.5amp | |
Lifting capacity | 250kg | Motor operating voltage | 24v DC (70VA) | |
Triple foot switch | 24v DC | Shipping dimensions | 190x60x60cm 90kg | |
ARTG No | 1237543 | Manufacturer | ABCO Health Care, Australia |
This information is given as guide to the options available with this
device.
All details are subject to change without notice.
Refer to manufactures instruction book for full operating
details.
Manufactured by ABCO Health Care, Dandenong South, Victoria (Australia).
I. D. Stewart Pty. Ltd.
ABN 69 001 130 338
56 Twin Road, North Ryde NSW 2113
Phone 02 9878 4217 (Australia)Mobile 0408 249 432
Send us an email
idstewart@bigpond.com
Copyright © I.D.Stewart Pty. Ltd. 2019 all rights reserved. CoffeeCup HTML Editor (www.coffeecup.com)