ABCO G55 Gynae chair details and specifications

"ABCO" G55 Gynae Chair details

"ABCO" G55 Gynae Chair specifications.

The ABCO G55 Gynae Chair is an Australian manufactured couch using a "Linak" motor unit manufactured in Denmark. This is designed for bigger patients (325kg lifting) as general purpose examination and treatment chair for Gynaecology and similar modalities. This chair has retractable castors to allow ease of movement. The electric control of the height, seat and backrest can be controlled from the front of the chair. The foot pads can be removed and the 50cm long extension section fitted to make a flat couch. The height range is 50 to 105cm and can lift 325kg.
Vinyl covered top uses medical grade vinyl over 12mm soft foam them 38mm firm foam on a plywood board. The standard widyh is 60cm with an option of 71cm wide.

"ABCO" G55 Gynae Chair options

The towel roll holder is a factory fitted item. The Gynae Lithotomy knee supports and the stool (of course) may be supplied later. The stool vinyl may be the same choice as the Gynae chair.

ABCO G55 Gynae Chair detailed specifications

ITEM	SPECIFICATION		ITEM	SPECIFICATION
Couch dimensions	1860 x 600mm (760mm across arm rests)		Frame	Heavy steel plate and steel tube powder coated grey
Height range	500 - 1050mm, tilt to 1400mm		Height lift mechanism	single swing arm
Lift motor	"Linak" European motor		Supply voltage	230v ac 59Hz 1.5amp
Lifting capacity	325kg		Motor operating voltage	24v DC (70VA)
Foot switch	24v DC		Shipping dimensions	170x80x65cm 110kg
ARTG No	123753		Manufacturer	ABCO Health Care, Australia

This information is given as guide to the options available with this device.
All details are subject to change without notice.
Refer to manufactures instruction book for full operating details.

Manufactured by ABCO Health Care, Dandenong South, Victoria (Australia).

Copyright I.D.Stewart Pty. Ltd. 2019 all rights reserved. CoffeeCup HTML Editor (www.coffeecup.com)