Update 10th June 2020

"ABCO" Physio C Treatment Table details and specifications

I. D. Stewart Pty. Ltd.

ABN 69 001 130 338

Suppliers of quality Physiotherapy and Rehabilitation Equipment.
Phone 02 9878 4217 (Australia)Mobile 0408 249 432
Send us an email idstewart@bigpond.com HOME PAGE



"ABCO" Physio C Treatment Table 2 section details

ABCO Physiotherapy Manipulation Couch C details ABCO Physiotherapy Manipulation Couch 2 section drawing



"ABCO" Physio Manipulation Couch C 3 section details

The ABCO Physiotherapy Manipulation Couch C 3 section couch uses two columns which cive a clear base. The ABCO Physiotherapy Manipulation Couch C 3 section has a head end that lifts and lower and a backrest that raises 80 degreas.


The ABCO Physiotherapy Manipulation "C" Couches are manufactured in Australia. They use the "Linak" column motor units manufactured in Denmark. These are quality general purpose manipulation and treatment couches designed for use in physiotherapy or medical rooms. They have a height range of 48cm to 88cm have the option of 75mm braked castors. The height controlled by a low voltage foot or hand switch. Option of electric control of the back rest. The height range andd can lift 300kg. The clean lines of the lifting mechanism make this a very safe couch with minimum chance of crush type injuries.
Vinyl covered top uses medical grade vinyl over 12mm soft foam them 38mm firm foam on a heavy plywood board.



"ABCO" Physio C treatment table options

The 75mm braked castors are factory fitted items. The stools (of course) may be supplied later.

Optional manipulation couch C 75mm castors.
75mm castors option
The stool with the backrest is a help when long treatments are involved.
Work stool with back rest
This is a practical adjustable height stool
Work stool, choice of vinyl colours.
The physiotherapy couch have a choice of vinyl colours
Couch and stool vinyl. Click for full range.


"ABCO" physiotherapy MANIPULATION COUCH C detailed specifications


ITEM SPECIFICATION ITEM SPECIFICATION
Couch dimensions 1870 x 600mm Frame Heavy steel plate and steel tube powder coated grey
Height range 480 to 880mm Height lift mechanism 2 column motors
Lift motors "Linak" European motor Supply voltage 230v ac 59Hz 1.5amp
Lifting capacity 300+kg Motor operating voltage 24v DC (70VA)
Foot switch(or hand switch) 24v DC Shipping dimensions 180x63x60cm 80kg
ARTG No 123753 Manufacturer ABCO Health Care, Australia


This information is given as guide to the options available with this device.
All details are subject to change without notice.
Refer to manufactures instruction book for full operating details.

Manufactured by ABCO Health Care, Clayton Victoria, Australia.

I. D. Stewart Pty. Ltd.

ABN 69 001 130 338

56 Twin Road, North Ryde NSW 2113
Phone 02 9878 4217 (Australia)Mobile 0408 249 432
Send us an email idstewart@bigpond.com HOME PAGE

Copyright I.D.Stewart Pty. Ltd. 2019 all rights reserved. CoffeeCup HTML Editor (www.coffeecup.com)