ABCO MASSAGE TABLE "C" details and specifications
I. D. Stewart Pty. Ltd.
ABN 69 001 130 338
Suppliers of quality Physiotherapy and Rehabilitation Equipment.
Phone 02 9878 4217 (Australia)Mobile 0408 249 432
Send us an email
idstewart@bigpond.com
HOME PAGE
"ABCO" MASSAGE TABLE "C" details
"ABCO" Massage Table "C" details.
The ABCO Massager Table "C" is manufactured in Australia and uses 2 "Linak" motor column units which are manufactured in Denmark. This deign has no lengthwise movement as is raised from 50cm to a height of 90cm and and provides a firm working surface without any "end bounce". These are general purpose massage and treatment tables with very clean and safe lines that would enhance any clinic. They have gas strut assist for adjusting the head section. The electric height adjustment is controlled by a low voltage foot or hand switch. The low height of 50cm allows easy access for the patient and these tables can lift more than 300kg. Wing arms are available as an option. Vinyl covered top uses medical grade vinyl over 12mm soft foam them 38mm firm foam on a heavy plywood board.
"ABCO" Massage Table "C" with wing arms
"ABCO" MASSAGE TABLE "C" options
The 75mm braked castors are factory fitted items. The stools (of course) may be supplied later.
"ABCO" MASSAGE TABLE "C" detailed specifications
ITEM | SPECIFICATION | ITEM | SPECIFICATION | |
---|---|---|---|---|
Couch dimensions | 1800 x 680mm | Frame | Heavy steel plate and steel tube powder coated grey | |
Height range | 500 to 900mm | Height lift mechanism | 2 column "Linak" | |
Lift motor | "Linak" European motor | Supply voltage | 230v ac 59Hz 1.5amp | |
Lifting capacity | over 300kg | Motor operating voltage | 24v DC (70VA) | |
Foot switch(or hand switch) | 24v DC | Shipping dimensions | 197x73x60cm 95kg | |
ARTG No | 123753 | Manufacturer | ABCO Health Care, Australia |