I. D. Stewart Pty. Ltd.
ABN 69 001 130 338
Suppliers of quality Physiotherapy and
Rehabilitation Equipment.
Phone 02 9878 4217 (Australia)Mobile 0408 249 432
Send us an email idstewart@bigpond.com
HOME PAGE
The P40 Podiatry Chair now has 65cm wide
panels. Note the clean lines of the base and the freedom from
mechanism that may cause crush injuries.
The P40T is the same except it uses a hand switch for control.
Both types will lift 300kg and will take a greater static
weight.
OPTIONS :-
The optional Extendible Leg Rest allows the leg rest to extend
15cm.
100mm Braked Castors where the chair needs to be moved in the
room.
The more sophisticated control box can be fitted which has 3
pre-settable memories positions.
This allow the chair to move to your choice of positions
without having to set the height, tilt and backrest
separately.
This feature can be a great help in a busy practice.
These Podiatry Chairs have been designed for the increasingly
heavy patient with
a lifting capacity of 300kg. Lifts from 50 to 90cm (heel height
to 150cm).
Swing back arms for easy access. Medical grade vinyl with a
choice of colours.
"Wedgewood" is the standard colour.
These 3 section chairs have an overall extended length of
186cm.
Electric operation of back rest and seat tilt and foot
rest.
ITEM | SPECIFICATION | ITEM | SPECIFICATION | |
---|---|---|---|---|
Couch dimensions | 1860mm x 600mm (800mm across arm rests) | Frame | Heavy steel plate and steel tube powder coated grey | |
Height range | 500 - 9000mm, tilt to 1500mm | Height lift mechanism | twin column "Linak" | |
Lift motor | "Linak" European motor | Supply voltage | 230v ac 59Hz 1.5amp | |
Lifting capacity | 300kg | Motor operating voltage | 24v DC (70VA) | |
Foot switch | 24v DC, 3 section. | Shipping dimensions | 170x80x65cm 125kg | |
Wheels | optional 100mm lockable castors | Vinyl | medical grade heavy duty | |
ARTG No | 123753 | Manufacturer | ABCO Health Care, Australia |
VINYL PANELS :- "Wedgewood" vinyl
(or a choice of vinyl colours), vinyl medical grade fire
retardant and formulated to inhibit the hardening and breakdown
due to oils and perspiration.
38mm high density foam + 12mm soft foam to give a firm but
comfortable top. Foam is taken over the edge of the plywood
base.
This reduces damage from bumps from trolleys, wheel chairs
etc.
All details are subject to change without notice.
Refer to manufactures instruction book for full operating
details.
Manufactured by ABCO Health Care, Dandenong South, Victoria
(Australia).
I. D. Stewart Pty. Ltd.
ABN 69 001 130 338
56 Twin Road, North Ryde NSW 2113
Phone 02 9878 4217 (Australia)Mobile 0408 249 432
Send us an email idstewart@bigpond.com
HOME PAGE
Copyright I.D.Stewart Pty. Ltd. 2019 all rights reserved. CoffeeCup HTML Editor (www.coffeecup.com)