change table strap.
I. D. Stewart Pty. Ltd.
ABN 69 001 130 338
Suppliers of quality Physiotherapy and Rehabilitation Equipment.
Phone 02 9878 4217 (Australia)Mobile 0408 249 432
Send us an email
idstewart@bigpond.com
The ABCO Junior Rehabilitation Change Table is designed for use with children ad the cot ends can extend the change table by 40cm. This change table is manufactured in Australia and uses a "Linak" motor unit manufactured in Denmark. The table is 125cm extendable by the Cot Ends to 165cm by 71cm wide. The height range is 45 to 95cm and can lift 200kg. This table has 4 x 125mm braked castors with one of the castors direction lockable to prevent the "shopping trolley effect". Ground clearance is 15cm to allow for patient hoists. Vinyl covered top uses medical grade vinyl over 12mm soft foam them 38mm firm foam on a plywood board.
| ITEM standard table | OPTION | ITEM standard table | OPTION | |
|---|---|---|---|---|
| Upholstery 70cm wide | 80cm wide | Vinyl colour "Navy" | Choice as per colour chart | |
| 125mm braked castors | High retractable castors | 200kg lifting capacity | 350kg lifting capacity | |
| 1 cot sides | Add 2nd upholstered cot side | |||
| Foot control (low voltage) | Hand control (low voltage) | No battery | add battery backup | |
| No body strap | Velcro body strap | No strap bar | Strap bars either side |
| ITEM | SPECIFICATION | ITEM | SPECIFICATION | |
|---|---|---|---|---|
| Couch dimensions | 1200 x 710mm (+ cot sides and ends) | Frame | Heavy steel plate and steel tube powder coated grey | |
| Height range | 450 - 950mm | Height lift mechanism | 2 swing arms | |
| Lift motor | "Linak" European motor | Supply voltage | 230v ac 59Hz 1.5amp | |
| Lifting capacity | 200kg (optional 350kg) | Motor operating voltage | 24v DC (70VA) | |
| Foot switch(or hand switch) | 24v DC | Shipping dimensions | 140x82x60cm 70kg | |
| ARTG No | 123753 | |||
| Manufacturers warranty | 5 years (parts only) | Manufacturer | ABCO Health Care, Australia |
This information is given as guide to the options available with this
device.
All details are subject to change without notice.
Refer to manufactures instruction book for full operating
details.
I. D. Stewart Pty. Ltd.
ABN 69 001 130 338
56 Twin Road, North Ryde NSW 2113
Phone 02 9878 4217 (Australia)Mobile 0408 249 432
Send us an email
idstewart@bigpond.com
Copyright © I.D.Stewart Pty. Ltd. 2019 all rights reserved. CoffeeCup HTML Editor (www.coffeecup.com)
