Update 10th January 2020

Tas-Tens details and specifications

I. D. Stewart Pty. Ltd.

ABN 69 001 130 338

Suppliers of quality Physiotherapy and Rehabilitation Equipment.
Phone 02 9878 4217 (Australia)Mobile 0408 249 432
Send us an email idstewart@bigpond.com HOME PAGE


Tas-Tens details

The TasTens output controls are at the top, the width and frequency are under the cover.

The Tas-Tens is a basic easy to use tens. The knobs and controls are proably not suitable for arthritic fingers as they are small (in keeping with the deign of these tens units). Traetment time s are 30min. 60min. or continuous. The pulse rate range is 2 - 150Hz and the pulse width is 60 - 250mS. Three treatment modes are ""B" burst mode, "N" normal (or continuous) mode and "M" modulated which sweeps between 2 pulse rates.


Tas-Tens specifications

The Tas-Tens has a frequency range od 1 to 150Hz and pulse width of 50 to 250µsec.



This information is given as guide to the options available with this device.
All details are subject to change without notice.
Refer to manufactures instruction book for full operating details.
Refer to a qualified medical practitioner or therapist for advice on use, treatment settings, frequency of use and contra indications.

Manufactured in Tiawan.

I. D. Stewart Pty. Ltd.

ABN 69 001 130 338

56 Twin Road, North Ryde NSW 2113
Phone 02 9878 4217 (Australia) Mobile 0408 249 432
Send us an email idstewart@bigpond.com HOME PAGE BACK to TILT TABLE page

Copyright © I.D.Stewart Pty. Ltd. 2019 all rights reserved. CoffeeCup HTML Editor (www.coffeecup.com)