Update 10th January 2020

ABCO Dual Action TILT TABLE details and specifications

I. D. Stewart Pty. Ltd.

ABN 69 001 130 338

Suppliers of quality Physiotherapy and Rehabilitation Equipment.
Phone 02 9878 4217 (Australia)Mobile 0408 249 432
Send us an email idstewart@bigpond.com HOME PAGE BACK to TILT TABLE page



"ABCO" DUAL ACTION TILT TABLE details

The ABCO Dual Action Tilt Table can be used as an examination couch or tilted to 80deg to bring the pationt to a standing position. The ABCO Dual Action Tilt Table is 175cm long and 75cm wide with optional widths of 57 or 70cm.

Dual Action Tilt Table shown with optional Torso Wedges and Work surface


The ABCO Dual Action tilt table can be supplied with a work surface, bolsters and adjustable angle foot rest. These tables us hospital grade vinyl with a wide range of colours


"ABCO" Dual Action Tilt Table STANDARD COUCH.

* Grey base / Choice of vinyl colours / 700mm wide
* Single section 1950mm long from foot plate with recessed lower section and long cut-out for individual strapping of legs.
* Adjustable angle foot plate (+15 / -25deg in 6 steps).
* Electric Height [50 -90cm] and Tilt [85°] adjustment with hand control.
* 125mm braked castors giving 155mm ground clearance for patient hoist access.
* Angle indicator.
* Set of 3 straps with 2 fully adjustable body straps (1 x 100mm wide, 1 x 200mm wide) and one individually adjustable split leg strap (200mm wide
with soft knee supports.
Battery backup inbuilt battery allows for use when power is not available.
* Lifting capacity 350kg, 200kg tilt. Option of 350kg tilt.




"ABCO" Dual Action Tilt Table OPTIONS.


Removable Work Surface :- clear plastic panel with body cut out. Fits to side rails at any point along the rails. Also available with angle adjustment.
Split foot plate for individual angle adjustment.
350kg tilting capacity
Torso wedges - adjustable height for torso support.
Manual release of tilt motor - allows a patient to be quickly brought from the tilt position in a medical or power failure emergency.
Electric back rest.
Cardiac cut out.
Removable top section for prone use.
Second hand control (or foot control).





"ABCO" Dual Action Tilt Table SPECIFICATIONS.

ITEM SPECIFICATION ITEM SPECIFICATION
Couch dimensions 1950 x 710mm Frame Heavy steel plate and steel tube powder coated grey
Height range 500 to 750mm Height lift mechanism 2 columns
Lift motor 2 "Linak" European column motors Supply voltage 230v ac 59Hz 3amp
Lifting capacity 360kg (tilt 200kg option 350kg) Motor operating voltage 24v DC (70VA)
Tilt mechanism dual electric "Linak"motor Hand switch 24v DC - up/down and tilt.
Warranty 5 years (parts only) Electrics Medically approved according to EN60601-1/AS3200.
Table weight 90kg Shipping dimensions 179x82x60cm 95kg
ARTG No 123753 Manufacturer ABCO Health Care, Australia


Vinyl Panels :- Navy vinyl (or a choice of vinyl colours), vinyl medical grade fire retardant and formulated to inhibit the hardening and breakdown due to oils and perspiration. 38mm high density foam + 12mm soft foam to give a firm but comfortable top. Foam is taken over the edge of the plywood base. This reduces damage from bumps from trolleys, wheel chairs etc.
Shipping :- packed on wood pallet with heavy plastic cover.


Specifications subject to change without notice


This information is given as guide to the options available with this device.
All details are subject to change without notice.
Refer to manufactures instruction book for full operating details.
Manufactured by ABCO Health Care, Dandenong South, Victoria (Australia).

I. D. Stewart Pty. Ltd.

ABN 69 001 130 338

56 Twin Road, North Ryde NSW 2113
Phone 02 9878 4217 (Australia) Mobile 0408 249 432
Send us an email idstewart@bigpond.com HOME PAGE BACK to TILT TABLE page

Copyright © I.D.Stewart Pty. Ltd. 2019 all rights reserved. CoffeeCup HTML Editor (www.coffeecup.com)