ABCO Dual Action TILT TABLE details and specifications
I. D. Stewart Pty. Ltd.
ABN 69 001 130 338
Suppliers of quality Physiotherapy and
Rehabilitation Equipment.
Phone 02 9878 4217 (Australia)Mobile 0408 249 432
Send us an email idstewart@bigpond.com
HOME PAGE
BACK to TILT TABLE page
"ABCO" DUAL ACTION TILT TABLE details
Dual Action Tilt Table shown with optional Torso Wedges and Work surface"ABCO" Dual Action Tilt Table STANDARD COUCH.
* Grey base / Choice of vinyl colours / 700mm wide
* Single section 1950mm long from foot plate with recessed
lower section and long cut-out for individual strapping of
legs.
* Adjustable angle foot plate (+15 / -25deg in 6 steps).
* Electric Height [50 -90cm] and Tilt [85°] adjustment with
hand control.
* 125mm braked castors giving 155mm ground clearance for
patient hoist access.
* Angle indicator.
* Set of 3 straps with 2 fully adjustable body straps (1 x
100mm wide, 1 x 200mm wide) and one individually adjustable
split leg strap (200mm wide
with soft knee
supports.
* Lifting capacity 200kg
"ABCO" Dual Action Tilt Table OPTIONS.
Removable Work Surface :- clear plastic
panel with body cut out. Fits to side rails at any point
along the rails. Also available with angle adjustment.
Split foot plate for individual angle
adjustment.
350kg lifting capacity also gives faster
up/down.
Optional widths - standard is 71cm (57cm to
90cm available).
Torso wedges - adjustable height for torso
support.
Manual release of tilt motor - allows a
patient to be quickly brought from the tilt position in a
medical or power failure emergency.
Electric back rest.
Cardiac cut out.
Removable top section for prone use.
Second hand control (or foot control).
Battery backup allows for use when power is
not available.
Retractable 50mm castors with one adjustable
corner fitting for on the ground stability. Retracts with
foot lever.
"ABCO" Dual Action Tilt Table SPECIFICATIONS.
ITEM | SPECIFICATION | ITEM | SPECIFICATION | |
---|---|---|---|---|
Couch dimensions | 1950 x 710mm (or 610mm) | Frame | Heavy steel plate and steel tube powder coated grey | |
Height range | 500 to 1000mm | Height lift mechanism | 2 swing arms | |
Lift motor | "Linak" European motor | Supply voltage | 230v ac 59Hz 1.5amp | |
Lifting capacity | 200kg (optional 350kg) | Motor operating voltage | 24v DC (70VA) | |
Tilt mechanism | electric "Linak"motor | Hand switch | 24v DC - up/down and tilt. | |
Warranty | 5 years (parts only) | Electrics | Medically approved according to EN60601-1/AS3200. | |
Table weight | 80kg | Shipping dimensions | 179x82x60cm 90kg | |
ARTG No | 123753 | Manufacturer | ABCO Health Care, Australia |
Vinyl Panels :- Navy vinyl (or a choice of
vinyl colours), vinyl medical grade fire retardant and
formulated to inhibit the hardening and breakdown due to oils
and perspiration. 38mm high density foam + 12mm soft foam to
give a firm but comfortable top. Foam is taken over the edge
of the plywood base. This reduces damage from bumps from
trolleys, wheel chairs etc.
Shipping :- packed on wood pallet with foam
and cardboard cover.
Specifications subject to change
without notice
This information is given as guide to the options available
with this device.
All details are subject to change without notice.
Refer to manufactures instruction book for full operating
details.
Manufactured by ABCO Health Care, Clayton Victoria
(Australia).
I. D. Stewart Pty. Ltd.
ABN 69 001 130 338
56 Twin Road, North Ryde NSW 2113
Phone 02 9878 4217 (Australia) Mobile 0408 249 432
Send us an email idstewart@bigpond.com
HOME PAGE
BACK to TILT TABLE page
Copyright © I.D.Stewart Pty. Ltd. 2019 all rights reserved. CoffeeCup HTML Editor (www.coffeecup.com)