Update 23rd January 2019

ABCO Physiotherapy Traction Couch details

I. D. Stewart Pty. Ltd.

ABN 69 001 130 338

Suppliers of quality Physiotherapy and Rehabilitation Equipment.
Phone 02 9878 4217 (Australia)Mobile 0408 249 432
Send us an email idstewart@bigpond.com HOME PAGE BACK to TRACTION page
BACK to Physiotherapy Manipulation couch page

ABCO Physiotherapy Traction Couch


ABCO Physiotherapy Traction Couch specifications


A very strong Physiotherapy Traction and Manipulation Couch with a smooth rolling panel for friction free traction. This panel can be locked at any part of its travel to ensure that the patient steps safely off the couch at the end of treatment. Traction panel rolls 12cm on ball bearing..
Electric height adjustment of 63 to 95cm using a "Linak" low voltage motor unit. Lifting capacity >200kg.
The head section lifts 30deg;, lower 30deg; and has a face hole. The foot or traction end lifts to 80deg;.
The couch can also be supplied with postural drainage adjustment. Center section (56 cm) elevates to +30deg;. Electric lift option.
The traction bracket has height adjustment (spring loaded) and will swing and lock up to 90deg; either side. Other mounting options are available.
Top panels of medical grade fire retardant vinyl over firm foam built on 19mm plywood fitted with metal thread attatchment inserts. Foam is rolled over the edges to cushion the vinyl from trolley and wheel chair knocks.
Castors allow for easy movement of the couch and when retracted the traction couch sits firmly on the floor. An adjusting foot at one end can balance any floor variations.
Manufactured in Australia.



Physiotherapy Traction couch drawings

Physiotherapy traction couch drawing Physiotherapy traction couch drawing



ABCO Physiotherapy Traction Couch - factory fitted options

ITEM OPTION ITEM OPTION
Upholstery (60cm wide) 71cm wide Vinyl colour "Navy" Choice as per colour chart
50mm retractable castors 75mm braked castors 200kg lifting capacity 350kg lifting capacity
Manual back ret Electric operation of back rest No center lift Electric operation center lift
Foot control (low voltage) Hand control (low voltage)


ABCO Traction Couch - electrical and mechanical specifications.

ITEM SPECIFICATION ITEM SPESIFICATION
Height adjustment 540-1040mm Lifting capacity 200kg
Lift mechanism Two leg swing arm Couch weight 85kg
Lift motor "Linak" actuator (European) Packed weight 100kg (170x63x65cm)
Control Footswitch (low voltage) ARTG No. 123753
Mains supply 230vAC, motor 24vDC 70VA Warranty 5 years parts only


This information is given as guide to the options available with this device.
All details are subject to change without notice.
Refer to manufactures instruction book for full operating details.
For use by physiotherapist or medical practitioner.
Refer to a qualified medical practitioner or therapist for advice on use, treatment settings, frequency of use and contra indications.
manufactured in Australia by - ABCO Health Care Pty.Ltd. Clayton, Victoria, Australia.

I. D. Stewart Pty. Ltd.

ABN 69 001 130 338

56 Twin Road, North Ryde NSW 2113
Phone 02 9878 4217 (Australia)Mobile 0408 249 432 Send us an email
idstewart@bigpond.com HOME PAGE BACK to Physiotherapy TRACTION page
BACK to Manipulation Couch page

Copyright © I.D.Stewart Pty. Ltd. 2019 all rights reserved. CoffeeCup HTML Editor (www.coffeecup.com)